Scag Power Equipment GC-STWC-61V operating instructions Install the bag assemblies

7.Install the blower assembly to the mounting bracket and secure with the mounting pin. See Figure 3-4.

8.Align the blower assembly with the discharge opening of the cutter deck. Tighten the hardware for the mounting bracket. See Figure 3-4.

9.Install the quick pin through the rear hole in the discharge chute mounting bracket. See Figure 3-

4.

BLOWER

ASSEMBLY

QUICK

PIN

HAIR MOUNTING

PIN BRACKET

MOUNTING PIN

TIGHTEN MOUNTING

BRACKET HARDWARE

RIGHT SIDE OF

CUTTER DECK SHOWN

(Note: Some parts not shown for viewing purposes.)

2006 GC-STC-V install art 3

FIGURE 3-4

10.Install the belt to the spindle pulley. When replacing the belt, see figure 3-5 below.

BACK SIDE

IDLER PULLEY BLOWER

PULLEY

FRONT SIDE	SPINDLE
	PULLEY
IDLER PULLEY

FIGURE 3-5

11.Install the new belt covers and secure. See items number 1 and number 21 on page 10 of the Blower Mounting Components section in the Illustrated Parts List for proper installation.

12.Install the hopper mounting brackets to the outside of the frame on the rear of the machine. See Figure 3-6.

Hopper

Mounting

Brackets

Rear Frame

Figure 4 A GC-STT Install Art

FIGURE 3-6

13.Attach the hood assembly to the machine by installing the mounting post into the hopper mounting brackets. Secure with the ring pins and tighten the locking bolts. See Figure 3-7.

Locking

Bolts

Ring Pins

Locking

Bolts

Ring Pins

FIGURE 3-7

14.Install the hose from the blower assembly adapter to the hopper hood and secure using the 8-1/2" clamps.

15.Install the bag assemblies.

16.Using the weight support bar as a guide, identify the four corresponding mounting holes, and the existing hardware that will need to be removed in order to secure the weight support bar to the front of the machine as shown. See Figure 3-8, Page 4.

3