INTRODUCTION
This manual has been prepared to provide the information you need to correctly assemble, operate, and maintain this edger. Read it carefully and keep it for future reference.
The replacement of any part on this product by other than the manufacturer's authorized replacement part may adversely affect the performance, durability or safety of this product.
USE OF OTHER THAN ORIGINAL SCAG REPLACEMENT PARTS WILL VOID THE WARRANTY.
If additional information or service is needed that is not outlined in this manual, please contact your Scag Power Equipment dealer. Scag dealers are trained in the latest service methods and carry a full line of Scag replacement parts.
When ordering parts, always provide the complete model and serial number of your edger.
All information provided in this manual is based upon information available at the time of printing. Scag Power Equipment reserves the right to make changes at any time without notice or obligation.
nDirection Reference
The "Right" and "Left", "Front" and "Rear" of the machine are referenced from the normal operating position.
nServicing The Engine
The detailed servicing of the engine is not covered in this manual. For service of the engine it is important to contact your Scag Dealer or an authorized servicing agent of the engine manufacturer. Any unauthorized
work performed on the engine will void the warranty.
SAFETY AND OPERATING
INSTRUCTIONS
CAUTION:
To avoid personal injury, it is imperative that all safety instructions be observed.
nRead This Operator's Manual
A replacement manual is available from your authorized Scag Service Dealer or by contacting: Scag Power Equipment, Service Department at P.O. Box 152, Mayville, WI 53050. Please indicate the complete model and serial number of your Scag product when ordering a replacement manual.
Your edger is only as safe as YOU, the operator. As with any power equipment, carelessness or error can result in serious bodily injury. Improper maintenance can also result in injury. To reduce the potential for injury, follow these instructions on safe operation.
nHow To Use This Edger
1.Be thoroughly familiar with the controls and the proper use of the machine.
2.Know how to stop the edger and disengage the controls quickly.
3.Use the edger only on flower beds and lawns.
4.Always stay behind the handles. Stones and other items thrown by the blade can cause serious injury (See Figure 1, page 2).
5.Do not modify or alter any component of the edger.
nDress Properly
1.Wear safety glasses or goggles.
2.Do not wear loose clothing or jewelry; they can be caught in moving parts. Always wear long pants that cover your legs.
1
