Scag Power Equipment STC52V-27CV-SS manual Cutter Deck, Hydraulic System, Productivity, 48V 52V

Section 3	R
Tire Pressure:
Front Caster	25 PSI
Drive	12 PSI
Fuel Tanks	Dual 4-Gallon Seamless Polyethylene Tanks with Large Opening and Fuel Cap
Seat	Padded, Thick Cushion with Extra Spring Support
Travel Speed:
Forward	0-10 MPH
Reverse	0-5 MPH

-NOTE- The machine will travel at 10 mph for transport purposes. For best cutting performance the forward travel speed should be adjusted depending upon the cutting conditions.

3.4 Cutter Deck

Type	Floating, Adjustable, Anti-Scalping, Hybrid Design Combines Out-Front and Belly-Mount Designs
Construction		Tri-plate deck construction
	Top of deck consists of three steel plates totaling nearly 1/2" of steel,7-gauge (3/16") deck skirt.
True Cutting Width:
48V		48" (122.0 cm)
52V		52" (132.0 cm)
61V		61" (154.94 cm)
Cutting Height Adjustment		Foot-Operated Lever Adjustment from Operator's Seat, 1.00" to 5.5" in 1/4"increments
Cutter Blades		0.197 in. Thick, Milled Edge, Wear Resistant Marbain™
Blade Engagement		Electric Blade Engagement Clutch with Control Panel Switch
		Connected to the Cutter Deck through a Belt.
Discharge Opening		Extra Wide Discharge Opening with Spring-Loaded Discharge Chute and Turbo Baffle
Discharge Chute		Black, Polypropylene (Plastic), Flexible
Spindles		Heavy-Duty 1-1/8" Top Dimension Spindle Shaft, Cast Housing, Taper Roller Bearing,
		Low Maintenance with Top Access Grease Fitting and Grease Overfill Relief Poppet
Spindle Pulleys		Split Steel with Easily Removed Taper Hubs
Cutter Deck Belts		B-section and Cogged Type with Kevlar Cord. Self-Adjusting, Self-Tightening
Electric Clutch Type		Ogura Heavy Duty PTO Clutch Brake

3.5 Hydraulic System

Hydraulic Oil Filter	10 Micron Spin-on Element Type
Hydraulic Reservoir	Nylon; 2-1/2 Quart Capacity

3.6 Weights and Dimensions	48V	52V	61V
Length	80"	80"	80"
Tracking Width	46.5"	46.5"	46.5"
Overall Width w/chute down	60.5"	64.5	73.5"
Overall Width w/chute up	49"	53"	62"
Overall Height w/ROPS (up on Folding Models)	66"	66"	66"
Overall Height w/ROPS down (Folding Models)	54"	54"	54"
Operating Weight w/ROPS	1050#	1100#	1150#

3.7 PRODUCTIVITY	48V	52V	61V
Cutting Width	48"	52"	61"
Acres Per Day	18.6	20.2	23.7

The preceding chart will aid you in determining how many acres your Scag mower will cut per day. The chart is an estimate based on 8 hours per day cutting time at 6 MPH with a 20% allowance for overlap and turns.

11