Section 7
3.Replace the radiator cap. Push down on the cap and turn clockwise until it stops.
- NOT E -
The cooling system should be flushed and the coolant replaced every 500 hours of op- eration or annually. See your Scag dealer for proper coolant replacement.
B. Cleaning the Radiator Debris Screen
After each day of operation, remove and clean the radiator debris screen.
CAUTION:
To avoid personal injury, always wear safety glasses when using compressed air.
1.Pull the debris screen up to remove.
2.Clean the debris screen with compressed air or a water hose.
- NOT E -
Check the radiator for excessive debris and clean with compressed air. Never spray a hot engine with water, use only compressed air to remove debris.
3.
C. Checking The Fan Belt Tension
Periodically check the fan belt tension. The belt should deflect 1/2" with 10 pounds of pressure. See your Scag dealer if the belt is in need of adjustment or replacement.
7.13 BODY, DECK, AND UPHOLSTERY
CAUTION:
Do not wash any portion of the equipment while it is hot. Do not wash the engine; use compressed air.
1.After each use, wash the mower and cutter deck. Use cold water and automotive cleaners. Do not use pressure cleaners.
2.Do not spray electrical components.
3.Use a mild soap solution or a vinyl/rubber cleaner to clean the seat.
4.Repair damaged metal surfaces using Scag
36
