Section 4

2. Change the engine oil and oil filter after the first 5

4.5 GROUND TRAVEL AND STEERING

hours of operation. (See Section 7.4.)

-IMPORTANT-

 

3.Check hydraulic oil level in reservoir. (See Section 7.3.)

4.Check for loose hardware. Tighten as needed.

5.Check interlock system for proper operation. (See Section 4.2.)

6.Check tire pressure. Adjust pressure if necessary. (See Section 7.10)

4.4STARTING THE ENGINE

CAUTION:

DO NOT USE STARTING FLUIDS. Use of starting fluids in the air intake system may be potentially explosive or cause a “runaway” engine condition that could result in engine damage and/or personal injury.

1.Be sure the fuel shutoff valve, located behind the operator's seat, is completely open. (See section 7.5.)

2.Sit in the operator’s seat and place the steering control levers in the neutral position.

3.Engage the parking brake.

4.If the engine is cold, choke the engine as needed.

5.Move the engine throttle control to about half engine speed.

6.Turn the ignition key to the START position and release the key as soon as the engine starts. Do not hold the key in the START position for more than 15 seconds at a time. Allow at least 60 seconds between each cranking attempt to prevent overheating of the starter motor. Prolonged cranking can damage the starter motor and shorten battery life.

7.Allow engine to warm before operating the mower.

If you are not familiar with the operation of a machine with lever steering and/or hydrostatic transmissions, the steering and ground speed operations should be learned and practiced in an open area, away from buildings, fences, or obstructions. Practice until you are comfortable with the handling of the machine before attempting to mow. Learn the operation on flat ground before operating on slopes.

-IMPORTANT-

Start practicing with a slow engine speed and slow forward travel.

Learn to feather the steering controls to obtain a smooth operating action.

Practice operating the mower until you are comfortable with the controls before proceeding to mow.

Forward Travel

To travel forward with the mower, disengage the parking brake and slowly push the steering control levers forward an equal distance. The further the steering control levers are pushed forward the greater the forward speed will be. To increase the speed, push the steering control levers further forward and to decrease the speed, pull the steering control levers back.

To stop the forward travel, pull the steering control levers back to the neutral position.

To steer the mower left while traveling forward, pull the left steering lever back. The further the lever is pulled back, the quicker the mower will turn left.

To steer the mower right while traveling forward, pull the right steering control lever back. The further the lever is pulled back, the quicker the mower will turn right.

10

Page 12 Page 14
Page 13
Image 13
Scag Power Equipment STT manual Ground Travel and Steering, Starting the Engine, Forward Travel
Page 12 Page 14

STT specifications

Scag Power Equipment is renowned for producing high-quality outdoor power equipment, and among its impressive lineup is the Scag STT series of zero-turn mowers. These machines are designed for professionals who require efficient, durable, and powerful mowing performance. The STT offers several features that set it apart from the competition, making it a fantastic choice for landscaping and lawn care businesses.

One of the standout features of the Scag STT is its powerful engine options. The mower is available with various engine choices, including the reliable Kawasaki and Kohler engines, which provide ample power to tackle even the toughest mowing tasks. With horsepower ratings reaching up to 25 HP, the STT ensures that operators can efficiently handle large properties and dense grass without any strain.

The STT's innovative design includes a robust steel frame and deck that provide exceptional durability and longevity. The mower's heavy-duty construction ensures it can withstand the rigors of daily professional use. The commercial-grade cutting deck is available in sizes ranging from 48 to 61 inches, allowing for versatility based on the user's specific needs. This deck features Scag's patented design, which enhances airflow for superior cutting performance and an immaculate finish.

Another key characteristic of the STT is its patented Velociti Drive System. This technology allows for faster ground speeds while maintaining optimum control, ensuring that operators can cover large areas quickly without sacrificing mowing quality. Additionally, the STT is equipped with a hydrostatic drive system that provides smooth acceleration and efficient operation, making it easy to navigate around obstacles and tight spaces.

Operators will also appreciate the comfort features incorporated into the STT design. The mower comes with a premium high-back seat, complete with adjustable armrests, which contributes to reduced fatigue during long mowing sessions. The ergonomic control layout, including easy-to-use controls and a spacious operator platform, enhances comfort and usability, making it ideal for professionals who spend hours mowing.

Maintenance is straightforward with the Scag STT, thanks to features like easy-access maintenance components and a simplified grease system. This design minimizes downtime and allows for quick servicing, enabling operators to spend more time on the job.

In summary, the Scag Power Equipment STT combines robust engineering, powerful engine options, and innovative technologies to deliver outstanding mowing performance. Its durability, comfort features, and ease of maintenance make it an excellent choice for landscape professionals looking for a reliable and efficient zero-turn mower for their business.
Top Page Image Contents