Manuals / Scag Power Equipment / Lawn and Garden / Lawn Mower

Scag Power Equipment STT manual Reverse Travel, Engaging the Deck Drive Cutter Blades

Models: STT

1 65
Download 65 pages 42.35 Kb
Page 14
Image 14

Section 4

-NOTE-

Smooth operation of the steering levers will produce smooth mower operation. While learning the operation of the steering controls, keep the travel speed low.

-IMPORTANT-

Do not travel forward over a curb. The mower will hang up on the curb. Raise the deck and travel backwards over the curb at a 45 degree angle. (see section 4.13 for cutter deck raising instructions)

Reverse Travel

CAUTION:

Disengage power to the mower before backing up. Do not mow in reverse unless absolutely necessary and then only after observation of the entire area behind the mower.

CAUTION:

Before backing up, observe the rear for persons and obstructions. Clear the area before backing up. Possible injury or property damage could occur.

To travel in reverse, pull both handles back. Keep the travel speed low while traveling in reverse.

-NOTE-

The mower will not travel straight in reverse. Slight adjustments must be made using the steering controls.

To steer left while traveling in reverse, allow the left steering control lever to move forward. The further the control is allowed to move forward, the quicker the mower will turn left.

To steer right while traveling in reverse, allow the right steering control lever to move forward. The further the control is allowed to move forward, the quicker the mower will turn right.

To stop the reverse travel, allow the steering control levers to return to the neutral position. If the mower is to be parked, engage the parking brake.

4.6ENGAGING THE DECK DRIVE (CUTTER BLADES)

1.Set the throttle at about 3/4 speed. Do not attempt to engage the deck drive at high speed as this shortens the electric clutch life — use only moderate engine speed when engaging the deck drive.

2.Engage the deck drive by pulling out on the yellow switch, located on the instrument panel, (Figure 4-3) to the engage position.

PULL UP TO ENGAGE

PUSH DOWN TO DISENGAGE

STT99CES

Figure 4-3 Cutter Engage Switch

-NOTE-

A squealing noise may be heard when engaging or disengaging the deck drive. It is caused by the electric clutch plates meshing as the mower comes up to speed.

3.To disengage the deck drive, push the switch in to the disengage position.

4.Always operate the engine at full throttle to properly maintain cutting speed. If the engine starts to lug down, reduce the forward speed and allow the engine to operate at maximum RPM.

11

Page 13 Page 15
Page 14
Image 14
Scag Power Equipment STT manual Reverse Travel, Engaging the Deck Drive Cutter Blades
Page 13 Page 15

STT specifications

Scag Power Equipment is renowned for producing high-quality outdoor power equipment, and among its impressive lineup is the Scag STT series of zero-turn mowers. These machines are designed for professionals who require efficient, durable, and powerful mowing performance. The STT offers several features that set it apart from the competition, making it a fantastic choice for landscaping and lawn care businesses.

One of the standout features of the Scag STT is its powerful engine options. The mower is available with various engine choices, including the reliable Kawasaki and Kohler engines, which provide ample power to tackle even the toughest mowing tasks. With horsepower ratings reaching up to 25 HP, the STT ensures that operators can efficiently handle large properties and dense grass without any strain.

The STT's innovative design includes a robust steel frame and deck that provide exceptional durability and longevity. The mower's heavy-duty construction ensures it can withstand the rigors of daily professional use. The commercial-grade cutting deck is available in sizes ranging from 48 to 61 inches, allowing for versatility based on the user's specific needs. This deck features Scag's patented design, which enhances airflow for superior cutting performance and an immaculate finish.

Another key characteristic of the STT is its patented Velociti Drive System. This technology allows for faster ground speeds while maintaining optimum control, ensuring that operators can cover large areas quickly without sacrificing mowing quality. Additionally, the STT is equipped with a hydrostatic drive system that provides smooth acceleration and efficient operation, making it easy to navigate around obstacles and tight spaces.

Operators will also appreciate the comfort features incorporated into the STT design. The mower comes with a premium high-back seat, complete with adjustable armrests, which contributes to reduced fatigue during long mowing sessions. The ergonomic control layout, including easy-to-use controls and a spacious operator platform, enhances comfort and usability, making it ideal for professionals who spend hours mowing.

Maintenance is straightforward with the Scag STT, thanks to features like easy-access maintenance components and a simplified grease system. This design minimizes downtime and allows for quick servicing, enabling operators to spend more time on the job.

In summary, the Scag Power Equipment STT combines robust engineering, powerful engine options, and innovative technologies to deliver outstanding mowing performance. Its durability, comfort features, and ease of maintenance make it an excellent choice for landscape professionals looking for a reliable and efficient zero-turn mower for their business.