R

Section 6

6.5 BELT ALIGNMENT

Belt alignment is important for proper performance of your Scag mower. If you experience frequent belt wear or breakage, see your authorized Scag service center for belt adjustment.

6.6 CUTTER DECK ADJUSTMENTS

Cutter deck level, pitch and height are set at the factory. However, if these adjustments should ever need to be made, the following procedures will aid in obtaining the proper cutter deck adjustment.

- NOTE -

Before proceeding with the cutter deck adjustments, be sure that all tires are properly inflated.

Cutter Deck Level

The cutter deck should be level from side-to-side for proper cutting performance. To check for level, be sure that the mower is on a flat, level surface, the tires are properly inflated and the cutter deck is set at the most common cutting height that you will use. On the RH side of the machine, check the distance from the bottom of the cutter deck to the floor. Next check the distance from the bottom of the cutter deck to the floor on the LH side of the machine. Both measurements should be the same. If the two measurements are different, the cutter deck level must be adjusted as follows:

1.On the front LH side of the cutter deck locate the cutter deck level adjusting bracket (See Figure 6.5)

ADJUST

HERE

LOOSEN

HERE

Figure 6-5. Cutter Deck Level Adjustment

2.Loosen the two (2) elastic stop nuts. Adjust the bolt up or down on the adjustment bracket to adjust the cutter deck until the distance from the bottom of the cutter deck to the floor is the same as the measurement on the RH side of the machine.

3.Tighten the two elastic stop nuts to secure the cutter deck in the proper position.

Cutter Deck Pitch

The pitch of the cutter deck should be equal between the front and rear of the cutter deck for proper cutting performance. To check for proper deck pitch, be sure that the mower is on a flat, level surface and the tires are properly inflated.

Check the distance from the bottom of the cutter deck to the floor at the rear RH side of the cutter deck directly behind the cutter deck hanging chains. Next check the distance from the bottom of the cutter deck to the floor at the front RH side of the cutter deck directly in front of the cutter deck hanging chains. The measurement at the front of the cutter deck should be equal to the measurement at the rear of the deck. Make these measurements at the LH side of the cutter deck also. If the measurement at the front of the deck is not equal, the cutter deck pitch must

be adjusted as follows:

1.Loosen the jam nut on both adjusting rods. (See Figure 6.6)

JAM NUT

ADJUST HERE

390S0174-1

Figure 6-6. Cutter Deck Level Adjustment

2.Using a wrench on the jam nut (See Figure 6.6) turn the adjusting rods until the proper pitch is obtained on both the RH and the LH side of the cutter deck. Tighten both jam nuts.

26

Page 29 Page 31
Page 30
Image 30
Scag Power Equipment STT61V-31KB-DF manual Cutter Deck Level, Cutter Deck Pitch
Page 29 Page 31

STT61V-31KB-DF specifications

The Scag Power Equipment STT61V-31KB-DF is a remarkable addition to the lineup of professional-grade mowers, tailored for those who require unmatched performance and durability. This zero-turn mower is designed with landscapers and lawn care professionals in mind, featuring cutting-edge technology and robust characteristics that elevate its functionality in various environments.

At the heart of the STT61V-31KB-DF is a powerful 31-horsepower Kawasaki engine. Renowned for its reliability and efficiency, this engine provides ample power, ensuring that even the most demanding tasks can be tackled with ease. This mower employs a dual-fuel capability, enabling operators to switch between gasoline and propane, thereby enhancing versatility and fuel consumption efficiency. This feature is particularly favorable for those looking to manage costs while maintaining high productivity.

One of the standout characteristics of the STT61V-31KB-DF is its 61-inch Velocity Plus cutting deck. The design of this deck allows for superior airflow, resulting in a clean cut even in tall grass. The adjustable cutting height ranges from 1 to 5 inches, giving users the flexibility to achieve the desired look for any lawn. The reinforced edges and heavy-duty construction ensure durability, enabling the mower to withstand the rigors of frequent use.

Another highlight is the innovative suspension system, which contributes to a smooth ride over uneven terrain. The adjustable anti-scalp rollers prevent lawn damage, ensuring that the mower glides effortlessly, maintaining high-quality cutting results. The ergonomic design of the operator controls allows users to navigate with ease, enhancing overall comfort during extended mowing sessions.

The machine is equipped with professional-grade wheels and a heavy-duty frame, providing stability and traction on various surfaces. Additionally, the intuitive dashboard incorporates easy-to-read gauges and controls, enabling operators to monitor performance and adjust settings instantly.

The Scag Power Equipment STT61V-31KB-DF exemplifies robust engineering, with a focus on performance, comfort, and durability. For those in the landscaping business or serious lawn enthusiasts, this mower stands out as a reliable companion that facilitates efficient and effective lawn care operations, making it a worthy investment.
Top Page Image Contents