R

Section 2

7.If the operator(s) or mechanic(s) cannot read English or Spanish, it is the owner's responsibility to explain this material to them.

8.DO NOT wear loose fitting clothing. Loose clothing, jewelry or long hair could get tangled in moving parts. Do not operate the machine wearing shorts; always wear adequate protective clothing including long pants. Wearing safety glasses, safety shoes and a helmet is advisable and is required by some local ordinances and insurance regulations.

WARNING

Always wear hearing protection. Operating this machine over prolonged periods of time can cause loss of hearing.

9.Keep the machine and attachments in good operating condition. Keep all shields and safety devices in place. If a shield, safety device or decal is defective or damaged, repair or replace it before operating the machine.

WARNING

This machine is equipped with an interlock system intended to protect the operator and others from injury. This is accomplished by preventing the engine from starting unless the deck drive is disengaged, the parking brake is on, the steering control levers are in the neutral position and the operator is in the seat. The system shuts off the engine if the operator leaves the seat with the deck drive engaged and/or the steering control levers are not in the neutral position and the parking brake is not engaged. Never operate equipment with the interlock system disconnected or malfunctioning.

10.Be sure the interlock switches are functioning correctly.

11.Fuel is flammable; handle it with care. Fill the fuel tank outdoors. Never fill it indoors. Use a funnel or spout to prevent spillage. Clean up any spillage before starting the engine.

12.DO NOT add fuel to a running or hot engine. Allow the engine to cool for several minutes before adding fuel. Never fuel indoors or inside enclosed trailers.

13.Keep flammable objects (cigarettes, matches, etc.), open flames and sparks away from the fuel tank and fuel container. Use only approved containers.

14.Equipment must comply with the latest requirements per SAE J137 and/or ANSI/ASAE S279 when driven on public roads.

- note -

If the mower is driven on public roads, it must comply with state and local ordinances as well as SAE J137 and/or ANSI / ASAE S279 requirements. Contact your local authorities for regulations and equipment requirements.

15.Do not operate without the side discharge chute installed and in the down position or with an optional grass catcher or mulch plate completely installed.

16.Check the blade mounting bolts at frequent intervals for proper tightness.

17.Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before starting the machine.

2.4 Operation Considerations

1.Know the function of all controls and how to stop quickly.

WARNING

DO NOT operate on steep slopes.To check a slope, attempt to back up it (with the cutter deck down). If the machine can back up the slope without the wheels slipping, reduce speed and use extreme caution. Under no circumstances should the machine be operated on slopes greater than 15 degrees. ALWAYS FOLLOW OSHA APPROVED OPERATION.

2.Reduce speed and exercise extreme caution on slopes and in sharp turns to prevent tipping or loss of control. Be especially cautious when changing directions on slopes.

4

Page 8 Page 10
Page 9
Image 9
Scag Power Equipment STT61V-35BVAC-SS, STT61V-27DFI-SS, STT-35BVAC-SS operating instructions Operation Considerations
Page 8 Page 10

STT61V-35BVAC-SS, STT-35BVAC-SS, STT61V-27DFI-SS specifications

Scag Power Equipment is well-known in the lawn care industry for its high-performance mowers and commercial-grade equipment, and the STT series represents the pinnacle of their innovation and engineering prowess. Among the most notable models are the STT61V-27DFI-SS, STT-35BVAC-SS, and STT61V-35BVAC-SS. Each of these mowers combines cutting-edge technology with user-friendly features, making them ideal choices for both commercial landscapers and avid homeowners.

The STT61V-27DFI-SS mower is powered by a dependable 27-horsepower Kohler EFI engine, offering exceptional fuel efficiency and reduced emissions. This model is equipped with a 61-inch cutting deck, providing an impressive cutting width that allows for quicker mowing. The mower’s unique design includes a heavy-duty steel frame and reinforced deck for durability, ensuring it can withstand the rigors of professional use. With large pneumatic tires, it offers superior traction and stability on various terrains, making it an excellent choice for uneven lawns.

Next, the STT-35BVAC-SS mowers are notably equipped with a specialized vacuum collection system. This model is designed to tackle leaves and debris, featuring a powerful 35-horsepower engine and a versatile collection system that efficiently gathers clippings. The unique bagging system reduces the need for subsequent clean-up, allowing users to complete their tasks more efficiently. Additionally, the STT-35BVAC-SS boasts a responsive hydrostatic transmission, providing seamless speed adjustments for varied mowing conditions.

Lastly, the STT61V-35BVAC-SS combines the superior engine performance of a 35-horsepower powerplant with the impressive 61-inch cutting deck. This model is particularly favored for its dual functionalities of quality mowing and debris management. Its advanced hydraulic lift system allows for quick adjustments, ensuring the optimal cutting height for each job. Users will appreciate the ease of use, with features such as ergonomic controls and plush seating designed for extended comfort during long mowing sessions.

All three models feature Scag's renowned attention to detail, including premium blade design for a clean cut and easy height adjustments. They are also backed by Scag's commitment to customer support and robust warranty options. These mowers exemplify Scag Power Equipment's dedication to quality, performance, and innovation, making them indispensable tools for any lawn care professional or weekend warrior. Whether tackling a residential yard or a commercial landscape, the STT series delivers unmatched reliability and efficiency.
Top Page Image Contents