Manuals / Scag Power Equipment / Lawn and Garden / Lawn Mower

Scag Power Equipment STT-35BVAC-SS Drive Belts, Cutter Blades, Blade Inspection, Blade Sharpening

Models: STT61V-35BVAC-SS STT-35BVAC-SS STT61V-27DFI-SS

1 138
Download 138 pages 22.9 Kb
Page 44
Image 44

Section 7

R

7.8 Drive Belts

All drive belts are spring-loaded and self-tensioning, however after the first 2, 4, 8 and 10 hours of operation, the belts should be checked for proper alignment and wear. Thereafter, check the belts after every 40 hours of operation or weekly, whichever occurs first.

- NOTE -

If you experience frequent belt wear or breakage, see your authorized Scag service center for belt adjustment.

7.9 Cutter Blades

A. Blade Inspection

1.Remove the ignition key before servicing the blades.

2.Raise the mower deck to the highest position. Place the lanyard pin in the highest cutting height position to prevent the cutter deck from falling.

WARNING

Always wear proper hand and eye protection when working with cutter blades.

3.Check the cutter blades for straightness. If the cutter blades appear bent, they will need to be replaced.

B. Blade Sharpening

- NOTE -

If possible, use a file to sharpen the blade. Using a wheel grinder may burn the blade.

- NOTE -

DO NOT sharpen the blades beyond 1/3 of the width of the blade. See Figure 7-7.

1.Sharpen the cutting edge at the same bevel as the original. See Figure 7-7. Sharpen only the top of the cutting edge to maintain sharpness.

Angle Blade Back

Do Not Cut In

 

X Must NOT Exceed

30

1/3 Blade Width

SGB033

 

Figure 7-7. Blade Sharpening

2.Check the balance of the blade. If the blades are out of balance, vibration and premature wear can occur. See your authorized Scag dealer for blade balancing or special tools, if you choose to balance your own blades.

C. Blade Replacement

WARNING

Do not attempt to straighten a bent blade, and never weld a broken or cracked blade. Always replace it with a new blade to assure safety.

WARNING

Always wear proper hand and eye protection when working with cutter blades.

4.If a blade cutting edge is dull or nicked, it should be sharpened. Remove the blades for sharpening. See "Blade Replacement."

- NOTE -

Keep the blades sharp. Cutting with dull blades not only yields a poor mowing job, but slows the cutting speed of the mower and causes extra wear on the engine and the blade drive by pulling hard.

1.Remove the ignition key before replacing the blades.

2.Raise the mower deck to the highest position. Place the lanyard pin in the highest cutting height position to prevent the cutter deck from falling.

3.Secure the cutter blades to prevent them from rotating, (use the optional Blade Buddy tool P/N 9212, to assist in securing the cutter blades), remove the nut from the blade attaching bolt. Remove the cutter blade, bolt and spacer from the spindle shaft. See Figure 7-8.

39

Page 43 Page 45
Page 44
Image 44
Scag Power Equipment STT-35BVAC-SS Drive Belts, Cutter Blades, Blade Inspection, Blade Sharpening, Blade Replacement
Page 43 Page 45

STT61V-35BVAC-SS, STT-35BVAC-SS, STT61V-27DFI-SS specifications

Scag Power Equipment is well-known in the lawn care industry for its high-performance mowers and commercial-grade equipment, and the STT series represents the pinnacle of their innovation and engineering prowess. Among the most notable models are the STT61V-27DFI-SS, STT-35BVAC-SS, and STT61V-35BVAC-SS. Each of these mowers combines cutting-edge technology with user-friendly features, making them ideal choices for both commercial landscapers and avid homeowners.

The STT61V-27DFI-SS mower is powered by a dependable 27-horsepower Kohler EFI engine, offering exceptional fuel efficiency and reduced emissions. This model is equipped with a 61-inch cutting deck, providing an impressive cutting width that allows for quicker mowing. The mower’s unique design includes a heavy-duty steel frame and reinforced deck for durability, ensuring it can withstand the rigors of professional use. With large pneumatic tires, it offers superior traction and stability on various terrains, making it an excellent choice for uneven lawns.

Next, the STT-35BVAC-SS mowers are notably equipped with a specialized vacuum collection system. This model is designed to tackle leaves and debris, featuring a powerful 35-horsepower engine and a versatile collection system that efficiently gathers clippings. The unique bagging system reduces the need for subsequent clean-up, allowing users to complete their tasks more efficiently. Additionally, the STT-35BVAC-SS boasts a responsive hydrostatic transmission, providing seamless speed adjustments for varied mowing conditions.

Lastly, the STT61V-35BVAC-SS combines the superior engine performance of a 35-horsepower powerplant with the impressive 61-inch cutting deck. This model is particularly favored for its dual functionalities of quality mowing and debris management. Its advanced hydraulic lift system allows for quick adjustments, ensuring the optimal cutting height for each job. Users will appreciate the ease of use, with features such as ergonomic controls and plush seating designed for extended comfort during long mowing sessions.

All three models feature Scag's renowned attention to detail, including premium blade design for a clean cut and easy height adjustments. They are also backed by Scag's commitment to customer support and robust warranty options. These mowers exemplify Scag Power Equipment's dedication to quality, performance, and innovation, making them indispensable tools for any lawn care professional or weekend warrior. Whether tackling a residential yard or a commercial landscape, the STT series delivers unmatched reliability and efficiency.