R

Section 2

7.If the operator(s) or mechanic(s) cannot read English or Spanish, it is the owner's responsibility to explain this material to them.

8.DO NOT wear loose fitting clothing. Loose clothing, jewelry or long hair could get tangled in moving parts. Do not operate the machine wearing shorts; always wear adequate protective clothing including long pants. Wearing safety glasses, safety shoes and a helmet is advisable and is required by some local ordinances and insurance regulations.

WARNING

Always wear hearing protection. Operating this machine over prolonged periods of time can cause loss of hearing.

9.Keep the machine and attachments in good operating condition. Keep all shields and safety devices in place. If a shield, safety device or decal is defective or damaged, repair or replace it before operating the machine.

WARNING

This machine is equipped with an interlock system intended to protect the operator and others from injury. This is accomplished by preventing the engine from starting unless the deck drive is disengaged, the parking brake is on, the steering control levers are in the neutral position and the operator is in the seat. The system shuts off the engine if the operator leaves the seat with the deck drive engaged and/or the steering control levers are not in the neutral position and the parking brake is not engaged. Never operate equipment with the interlock system disconnected or malfunctioning.

10.Be sure the interlock switches are functioning correctly.

11.Fuel is flammable; handle it with care. Fill the fuel tank outdoors. Never fill it indoors. Use a funnel or spout to prevent spillage. Clean up any spillage before starting the engine.

12.DO NOT add fuel to a running or hot engine. Allow the engine to cool for several minutes before adding fuel. Never fuel indoors or inside enclosed trailers.

13.Keep flammable objects (cigarettes, matches, etc.), open flames and sparks away from the fuel tank and fuel container. Use only approved containers.

14.Equipment must comply with the latest requirements per SAE J137 and/or ANSI/ASAE S279 when driven on public roads.

- note -

If the mower is driven on public roads, it must comply with state and local ordinances as well as SAE J137 and/or ANSI / ASAE S279 requirements. Contact your local authorities for regulations and equipment requirements.

15.Do not operate without the side discharge chute installed and in the down position or with an optional grass catcher or mulch plate completely installed.

16.Check the blade mounting bolts at frequent intervals for proper tightness.

17.Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before starting the machine.

2.4 Operation Considerations

1.Know the function of all controls and how to stop quickly.

WARNING

DO NOT operate on steep slopes.To check a slope, attempt to back up it (with the cutter deck down). If the machine can back up the slope without the wheels slipping, reduce speed and use extreme caution. Under no circumstances should the machine be operated on slopes greater than 15 degrees. ALWAYS FOLLOW OSHA APPROVED OPERATION.

2.Reduce speed and exercise extreme caution on slopes and in sharp turns to prevent tipping or loss of control. Be especially cautious when changing directions on slopes.

4

Page 8
Image 8
Scag Power Equipment STWC48V-26KA-LC, STWC48V-25CV operating instructions Operation Considerations

STWC48V-25CV, STWC48V-26KA-LC specifications

Scag Power Equipment has established a reputation for producing high-quality lawn care equipment, and the STWC48V-26KA-LC and STWC48V-25CV models exemplify this commitment to performance and durability. These walk-behind mowers are designed to handle a variety of mowing tasks while delivering a superior cutting experience.

The STWC48V-26KA-LC features a robust 26 HP Kawasaki engine, known for its reliability and fuel efficiency. This engine provides ample power to tackle tough grass and uneven terrain, ensuring that the mow is both efficient and effective. The 48-inch cutting deck allows for a wider mowing swath, reducing the time spent on larger properties. It is equipped with Scag's innovative Velocity Plus deck design, which promotes superior airflow, resulting in a clean and even cut while minimizing clumping.

Moreover, the STWC48V-26KA-LC includes an adjustable cutting height feature, allowing users to choose from a range of settings to achieve the desired grass height. The ergonomic controls and comfortable operator platform enhance usability, ensuring that even extended mowing sessions are not taxing on the user. Additionally, the machine's heavy-duty construction ensures longevity and resistance to wear and tear.

On the other hand, the STWC48V-25CV model comes with a 25 HP Vanguard engine, providing a powerful and smooth mowing experience. Like its counterpart, it features a 48-inch cutting deck that facilitates efficient mowing over larger areas. The high-performance cutting system ensures that the grass is cut cleanly, promoting healthy grass growth and an appealing lawn appearance.

Both models are equipped with advanced technologies that aid in ease of operation. The handle design allows for one-hand operation, and the speed control ensures precision while navigating corners and obstacles. Furthermore, the durable wheels and casters enhance maneuverability and stability on varied terrains, making them ideal for both residential and commercial use.

From the durable construction to the powerful engines and innovative cutting technologies, both the STWC48V-26KA-LC and STWC48V-25CV ensure that lawn care tasks are completed efficiently and effectively. Scag Power Equipment continues to set the standard in the lawn care industry with these reliable and high-performing walk-behind mowers. Users can confidently invest in these models, knowing they are backed by Scag's commitment to quality and performance.