R

Section 6

-note-

Before proceeding with this adjustment, be sure that the caster wheels turn freely and that the tire pressure in the drive wheels is correct. If the tire pressure is not correct, the machine will pull to the side with the lower pressure.

1.If at full speed the mower pulls right, it is an indication that the left wheel is turning faster than the right wheel. To adjust this condition, proceed as follows:

6.3Throttle Control and Choke Adjustments

These adjustments must be performed by your Scag dealer to ensure proper and efficient running of the engine. Should either need adjustment, contact your authorized Scag service center.

6.4 BELT ADJUSTMENTS

A.Stop the machine and place the steering control levers in the neutral position. Loosen the lock nuts securing the ball joints at each end of the LH steering control rod. Rotate the control rod to lengthen the rod and tighten the lock nuts. This will cause the control rod to stroke the LH pump less, slowing down the LH wheel. See Figure 6-3.

WARNING

Before removing any guards, shut the engine off and remove the ignition key. Wait for all moving parts to come to a complete stop before beginning work.

- NOTE -

If after making the adjustment as outlined in step 1A, the machine creeps forward or backward, the neutral adjustment must be made as described on page 20.

2.If at full speed the mower pulls left, it is an indication that the right wheel is turning faster than the left wheel. To adjust this condition, proceed as follows:

A. Stop the machine and place the steering control levers in the neutral position. Loosen the lock nuts securing the ball joints at each end of the RH steering control rod. Rotate the control rod to lengthen the rod and tighten the lock nuts. This will cause the control rod to stroke the RH pump less, slowing down the RH wheel. See Figure 6-2.

- NOTE -

If after making the adjustment as outlined in step 2A, the machine creeps forward or backward, the neutral adjustment must be made as described on page 20.

22

All drive belts and cutter deck belts are spring loaded and self-tensioning. The belts should be checked periodically for proper alignment and wear.

6.5 BELT ALIGNMENT

Belt alignment is important for proper performance of your Scag mower. If you experience frequent belt wear or breakage, see your authorized Scag service center for belt adjustment.

6.6 Cutter deck adjustments

Cutter deck level, pitch and height are set at the factory. However, if these adjustments should ever need to be made, the following procedures will aid in obtaining the proper cutter deck adjustment.

- NOTE -

Before proceeding with the cutter deck adjustments, be sure all tires are properly inflated.

Page 25 Page 27
Page 26
Image 26
Scag Power Equipment SVR61V-29FX manual Throttle Control and Choke Adjustments, Belt Adjustments, Belt Alignment
Page 25 Page 27

SVR61V-29FX specifications

The Scag Power Equipment SVR61V-29FX is a standout in the realm of commercial-grade zero-turn mowers, designed to meet the demanding needs of lawn care professionals and discerning homeowners alike. This powerful machine is engineered to deliver exceptional performance, efficiency, and durability, making it a reliable choice for a variety of mowing applications.

At the heart of the SVR61V-29FX is a robust 29-horsepower Kawasaki FX series engine. This powerful engine is known for its reliability and superior performance, allowing for smooth operation and optimal cutting capabilities. The advanced air filtration system ensures that the engine operates efficiently, prolonging its life while maintaining peak performance.

One of the signature features of the SVR61V-29FX is its 61-inch Velocity Plus cutting deck. This innovative deck design is optimized for maximum airflow and cutting efficiency, allowing for a precise and clean cut even in tough mowing conditions. The heavy-duty, welded steel construction of the deck ensures durability and longevity, reducing the risk of damage over time. The deck's height is easily adjustable, providing users with the flexibility to choose their desired cutting height for various grass types.

The SVR61V-29FX is equipped with hydrostatic transmission, providing seamless control and speed management. The intuitive dual-lever steering system allows for precise maneuverability, making it easy to navigate around obstacles and tight spaces. This zero-turn capability enhances productivity by reducing the time it takes to mow large areas, a key feature for professionals seeking efficiency.

In terms of operator comfort, the SVR61V-29FX boasts a comfortable, plush seat with armrests that support extended usage without fatigue. The ergonomic design of the controls further enhances the user experience, allowing operators to efficiently manage mowing tasks without unnecessary strain.

Additionally, the SVR61V-29FX is built with a rugged frame and heavy-duty components, designed to withstand the rigors of frequent use. Scag’s commitment to quality ensures that this mower is not just a workhorse but also a long-term investment for its users.

Overall, the Scag Power Equipment SVR61V-29FX combines powerful performance, cutting-edge technology, and user-focused design characteristics, making it an exceptional choice for anyone looking to achieve professional-grade mowing results. Its combination of power, precision, and comfort sets it apart in the competitive landscape of zero-turn mowers.
Top Page Image Contents