Scag Power Equipment SVR61V-29FX Maintenance Considerations & storage, Front Tie Down Points

R

Section 2

21.Tie the mower down securely using the tie down points located on the front and rear of the machine. See Figure 2-2 and 2-3. Secure using straps, chains, cable, or ropes. Both front and rear straps must be directed down and outward from machine.

TIE DOWN	TIE DOWN
POINT
	POINT

Figure 2-2. Front Tie Down Points

TIE DOWN	TIE DOWN
POINT	POINT

Figure 2-3. Rear Tie Down Points

22.Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

23.NEVER leave the machine running unattended.

2.5Maintenance Considerations & storage

1.Never make adjustments to the machine with the engine running unless specifically instructed to do so. If the engine is running, keep hands, feet, and clothing away from moving parts.

2.Place the neutral lock lever in neutral lock, engage the parking brake, stop engine and remove key or disconnect spark plug wire to prevent accidental starting of the engine when servicing or adjusting the machine. Wait for all movement to stop before adjusting, cleaning or repairing.

3.Remove spark plug wire before making any repairs.

4.Keep all nuts, bolts and screws tight, to ensure the machine is in safe working condition. Check blade mounting bolts frequently to be sure they are tight.

5.Do not change the engine governor settings or overspeed the engine. See the engine operator's manual for information on engine settings.

6.To reduce fire hazard, keep the cutting units, drives, muffler and engine free of grass, leaves, excessive grease, oil and dirt.

7.Park the machine on level ground.

8.NEVER allow untrained personnel to service the machine.

9.Use care when checking blades. Use a Blade Buddy, wrap the blade(s) or wear gloves and USE CAUTION when servicing blades. Only replace blades. NEVER straighten or weld blades.

10.Keep all parts in good working condition. Replace all worn or damaged decals.

11.Use jack stands to support components when required.

12.Carefully release pressure from components with stored energy.

WARNING

Hydraulic fluid is under high pressure and can penetrate skin causing injury. If hydraulic fluid is injected into the skin, it must be surgically removed within a few hours by a doctor or gangrene may result.

Keep body and hands away from pinholes or nozzles that eject hydraulic fluid under high pressure.Use paper or cardboard and not hands to search for leaks.

Safely relieve all pressure from the hydraulic system by placing the control levers in the neutral lock position and shutting off the engine before performing any work on the hydraulic system.

If you need service on your hydraulic system, please see your authorized Scag dealer.

13.Let the engine cool before storing.

14.DO NOT store the machine near an open flame.

15.Shut off fuel while storing or transporting.

16.DO NOT store fuel near flames or drain indoors.

6