Special Tools Continued
Combination Upholstery/Dusting Brush Tool: Two types of cleaning tools are included in one attachment: rotate for desired tool.
■Use Brush side to dust furniture, blinds, books, lamps, shelves.
■Use Upholstery side for curtains, draperies, cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachments for a longer reach.
NOTE: When using the Hose for above floor cleaning, make sure the Powerfoot does not tilt forward.
Power Cord
When you are done using your BISSELL PowerForce, return it to the Upright position and store the Power Cord.
1.Turn vacuum cleaner OFF.
2.Unplug Power Cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.
3.Loop Power Cord around Cord Wraps on side of vacuum cleaner.
4.Clip molded plug to Power Cord to secure.
Routine Maintenance
To maintain maximum performance from your BISSELL PowerForce, perform these simple maintenance checks.
Bag Change Indicator
Select BISSELL PowerForce models are equipped with a Bag Change Indicator. This indicator monitors the airflow through the Dust Bag and turns red to indicate a reduction or blockage. The following conditions may cause it to become completely red.
1.Dust Bag is full; change the bag.
2.Dust Bag is clogged with fine materials; change the bag.
3.Clog in the vacuum; clear the clog.
Tip:
Your BISSELL PowerForce features a Quick Release™ Cord Wrap. To remove the Power Cord quickly and easily, rotate the Upper Cord Wrap towards floor, and slip Power Cord from Upper and Lower Cord Wraps.
WARNING:
To reduce the risk of electric shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
Tip:
Vacuuming new carpet or fine powders may clog the Dust Bag, causing the Bag Change Indicator to turn red even though the Dust Bag does not appear to be full. Change the Dust Bag to restore maximum performance.
Bag Change
CHANGE BAG WHEN RED
Indicator
7
