over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For over-the airwave digital stations please check http://www.antennaweb.org. This tuner DOES NOT support QAM.

For digital cable, you WILL need a cable box.

8.HDMI1-3– HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video. HDMI 2 also doubles as the MHL connection for cell phones. MHL is a protocol where the TV will display what your cell phone displays. If your cell phone supports MHL you can purchase a MHL cable from any electronic store and connect it to HDMI 2 and also your cell phone. Make sure the TV’s source is changed to HDMI 2 and turn on your cell phone. You should see an image of your cell phone screen. HDMI 2 also supports ROKU™ streaming stick. Plug the ROKU stick to HDMI 2, and switch your source to HDMI2. Afterwards use the purple colored buttons to access ROKU functions.

9.HEADPHONE – This connection is for headphones to be attached to the TV.

10.Analog Audio Out – This connection is for connecting to analog audio receivers.

Please Note:

This TV features a power saving function which will turn off the TV automatically after 10 minutes of idling on a connection with no signal. This feature is present on all connection.

This TV does NOT support QAM under TV tuner.

- 14 -

www.SCEPTRE.com

SCEPTRE E485 HDTV User Manual

Page 14
Image 14
Sceptre Technologies E485 user manual This TV does not support QAM under TV tuner