Connecting a Digital Audio Receiver with Coax
SPDIF…
1.Make sure the power of HDTV and your receiver is turned off.
2.Obtain an optical SPDIF cable, connect it to your receiver’s optical SPDIF digital input and the optical SPDIF connection on the on the back of the HDTV.
3.Turn on the HDTV and your receiver. Please Note :
•If you want pure digital stream for your receiver to decode, you must also configure the TV’s OSD
•If your receiver is making static noises when receiving 5.1CH, you must use the PCM option instead.
•Please reference the receiver’s manual as well, to make sure the receiver is configured to receive signals correctly from the TV.
•The TV’s SPDIF out for 5.1CH is ONLY used for antenna/cable connection. Any other incoming audio signal will be passed out of SPDIF in PCM format.
- 23 -
www.SCEPTRE.com
SCEPTRE E485 HDTV User Manual
