- 13 - www.SCEPTRE.com
SCEPTRE X425 HDTV User Manual
Rear View Connections 1. SPDIF - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (COAX SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital coax input.
2. Audio In - This connection port is for people who want to provide audio to the
TV when the TV is being used as a computer monitor. The sources use
3.5mm mini-jack audio cable.
3. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org.
4. VGA - This connection port connects to a computer for video using the VGA
cable. Be sure to connect your audio cable to the connection labeled audio in
for sound.
5. YPbPr – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect red for right channel audio, and white for
left channel audio. This connection shares audio red / white jacks with
the source VIDEO.
6. Video – Video connects to devices that use composite video cables such as
VCR or DVD player or Wii™. Connect the yellow for video and the red / white
for audio. This connection shares audio red / white jacks with the source
YPbPr.