Sceptre Technologies X226 manual Tips and Safety Precautions

Tips and Safety Precautions

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.

•To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the X226 LCD MONITOR.

•Unplug the power cord before cleaning the X226 LCD MONITOR. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

•Always use the accessories recommended by the manufacturer to insure compatibility.

•When moving the X226 LCD MONITOR from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the X226 LCD MONITOR immediately after this to avoid causing fire, electric shock or component damage.

•Do not place the X226 LCD MONITOR on an unstable cart, stand, or table. If the X226 LCD MONITOR falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the X226 LCD MONITOR.

•Any heat source should maintain a distance of at least 5 feet away from the X226 LCD MONITOR, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.

•Slots and openings in the back and bottom of the bezel are provided for ventilation. To ensure reliable operation of the X226 LCD MONITOR and to protect it from overheating, be sure these openings are

not blocked or covered. Do not place the X226 LCD MONITOR in a bookcase or cabinet unless proper ventilation is provided.

•It is not recommended to use the X226 LCD MONITOR in a portrait format (by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the monitor.

•Never push any object into the ventilation slots of the X226 LCD MONITOR. Do not place any objects on the top of the Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the X226 LCD MONITOR.

•The X226 LCD MONITOR should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

•The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

•The X226 LCD MONITOR is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

SCEPTRE X226 Page5