Connecting to a PC with VGA and 3.5 mm minijack …
1.Make sure the power of HDTV and your PC is turned off.
2.Obtain a
3.Obtain a 3.5 mm
4.Turn on the power of the HDTV and your PC.
5.Use the remote control’s source button or the source button on the TV to switch to PC.
6.Change your PC resolution to 1920x1080 at 60 Hz refresh rate.
7.Press MENU to use the OSD’s PICTURE option.
8.Under the PICTURE option select PC Settings.
9.Under PC Settings use AUTO ADJUST to adjust the screen.
Please Note :
For the best results, please set your PC resolution to 1920x1080 at 60 Hz. Please refer to the PC or graphic card’s manual for further instructions on how to set your resolution and refresh rate.
Please refer to your PC manual for video output requirements of the video card.
The VGA port of the TV features a power saving mode which will automatically turn off the TV, if there’s no signal provided for more than 10 minutes.
-21 -
www.SCEPTRE.com
SCEPTRE
