Sceptre Technologies X325BV-FMDR user manual TV’S Universal

Problems	Solutions
TV’S UNIVERSAL	This television follows SONY’s universal remote code. To find
REMOTE CODE	the actual code you must read through your own universal
	remote’s guide book.
TV CHANNELS ARE	Check your auto lock function’s settings inside the OSD. You
BLOCKED	may have locked up some channels but forgot about them.
	Refer to page 32 for more instructions.
UNIVERSAL REMOTE	This TV follows SONY’s universal remote code. Please check
CODE	your hand book for SONY’s codes then apply them.
THE TV TURNS ON	This TV is a High Definition liquid crystal display panel TV. It
OR OFF SLOWLY	requires a few more seconds than normal TVs to power up
AND THE SCREEN	and show the picture.
SHOWS UP SLOWLY
NO SOUND ON PC	Make sure you have a 3.5 mm mini-jack cable connected from
	your pc’s sound output to the TV’s VGA STEREO INPUT.
HDCP VIDEO SAYS	Reboot your HDCP video device but turning them off and
NO HDCP SUPPORT	unplugging the power cord. Wait up to 8 minutes to plug the
	power back in to see if it works or not.
	Make sure you have a 3.5 mm mini-jack cable connected from
HDCP VIDEO HAS NO	your HDCP video device’s sound output to the TV’s VGA
AUDIO	STEREO INPUT. If your HDCP video device uses RCA
	AUDIO jacks, you’ll need to obtain a RCA audio converted into
	3.5 mm mini-jack cable.
CANNOT GET	Make sure the TV is recognized as plug and play monitor. Try
1920X1080 ON PC	updating your video card’s drivers as well. If that does not
VGA	help, most likely you’ll need to upgrade your video card to a
	newer one.
PICTURE IS	This might be from interference from large electrical
DISTORTED OR HAS	appliances, cars, motorcycles, or fluorescent lights. If the TV
ABNORMAL SOUND	is close to the wall, try moving the TV to another room in your
	house to see if the problem still occurs.
	If you’re using HDMI or a TV digital channel make sure you
	use the ASPECT button to switch to 16:9 format. If you are
	using VGA, use the AUTO ADJUST function to adjust to the
PICTURE DOES NOT	screen. Please Note : If you are using regular analog TV, AV,
	or component in 480i resolution, use the ASPECT button to
COVER THE ENTIRE	switch to 16:9 in order to fill up the screen. Please Note : This
SCREEN	note this feature will distort the picture.
	For best image quality, view HD widescreen programs where
	possible. If HD content is not available view “Standard
PICTURE QUALITY IS	Definition” from a digital source. Standard, analog TV will
	always be noticeable inferior to HD because your TV has
HORRIBLE!!	video that is many times better than old TV’s and so you can
	see interference and deficiencies you did not KNOW you had.
PICTURE HAS	Your TV is manufactured using an extremely high level of
PIXELS THAT ARE	precision technology, however, sometimes some pixels of your
ALWAYS	TV may not display. Pixels defects within industry
DISPLAYING THE	specifications are inherent to this type of product and do not
SAME COLOR	constitute a defective product.
I CANNOT CHANGE	Your TV syncs time automatically according to your local TV
THE TIME MANUALLY	channel. This function only works while the TV’s tuner is
	connected to an ANTENNA.
	- 48 -

www.SCEPTRE.com

SCEPTRE X325BV-FMDR User Manual