Rear View Connections

1.SPDIF - This connection port is used for sending out digital audio signals to digital surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either bit-stream or PCM digital sound signal to a home theater receiver with digital coax input.

2.TV – This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. For over-the airwave digital stations please check http://www.antennaweb.org.

3.VGA - This connection port connects to a PC for video using VGA cable. Be sure to connect your audio cable to the VGA Stereo input if you want sound out of VGA video source.

4.Audio In - This connection port is for people who want to provide audio to the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio cable.

5.HDMI1-3– HDMI connects to devices that use HDMI cable, such as Blu- ray or HD DVD player, or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. This port also can accept a HDCP video device for video.

6.USB – USB connects to USB flash drives for playing music and picture. The USB port is also used for updating the TV’s firmware.

-13 -

www.SCEPTRE.com

SCEPTRE X505BV-FHD HDTV User Manual

Page 13
Image 13
Sceptre Technologies X505BV-FHD user manual Rear View Connections