Schneider Electric E4800

PowerLogicTM E4800 Series 930-112-01

PowerLogic E4800 configuration tool guide 02/2009

2. Under the Unit drop-down menu, select Send to transmit the

configuration settings from your PC to the PowerLogic E4800 meter

currently selected. See Figure 14.

Figure 14: Sending the configured settings to the meter

3. To verify whether the configuration was successfully sent, check the

status bar at the bottom of the window where the confirmation message

File loaded successfully! should appear. See Figure 14.

Contents

Main Hazard Categories and Special Symbols PLEASE NOTE WARNING CAUTION Page Page Table of Contents Page POWERLOGIC E4800 CONFIGURATION TOOL GUIDE System Set-up and Description "SW1" Page Page Page Page PowerLogic Configuration Tool Page Page Page Table 2: Configuration parameters Page Figure 6: Period tab in the Report section Table 3: Period tab configuration parameters Figure 7: Types tab in the Report section Table 4: Types tab configuration parameters Page Manufacturing Tab