NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not allowed in Canada. Use of an adapter plug in the United States is not recommended.
8.2Recommended minimum AWG size for extension cord:
•100 feet long or less - use an 14 gauge extension cord.
•Over 100 feet long - use a 12 gauge extension cord.
9.ASSEMBLY INSTRUCTIONS No assembly required
10.Mounting Instructions
To mount the charger to a wall or other flat surface:
10.1Remove the two screws from one side of the unit near the back.
10.2Attach a mounting bracket, with the keyhole towards the top, using the screws you just removed.
10.3Repeat for the other side. Note: Completely install one bracket before moving to the next.
10.4Using the charger as a template, install two #10 panhead screw anchors (or equivalent) into the wall you want to mount the charger to. Leave the heads of the screws extended 1/16” away from the surface. The mounting brackets are designed to match the 16” wall stud spacing commonly found in wood and steel framed buildings, for increased support install the anchors into the wall studs. NOTE: Make sure the screw/anchor combination installed into the wall is able to support up to fifty pounds of weight.
10.5Position the charger, with the mounting brackets installed, so that the keyhole slots on the mounting brackets line up with both screws you installed. Then slide the charger down so that the screw heads lock in the keyhole slot of the mounting brackets.
• 6 •
