Schumacher 94080043, INC-406AC owner manual Before Returning for Repairs, Replacement Parts

PROBLEM	POSSIBLE CAUSE	REASON/SOLUTION
Charger will not turn on	AC outlet is dead.	Check for open fuse or
when properly connected.		circuit breaker supplying AC
		outlet.
	Poor electrical connection.	Check power cord and
		extension cord for loose
		fitting plug.
Battery clips do not spark	The charger is equipped	No problem, this is a normal
when touched together.	with an auto-start feature.	condition.
	It will not supply current
	to the battery clips until
	a battery is properly
	connected. Unlike
	traditional chargers, the
	clips will not spark if
	touched together.

17. REPLACEMENT PARTS
Output Cables (INC-406A)	38-99-000679
Output Cables (INC-406AC)	22-99-001838

18.BEFORE RETURNING FOR REPAIRS

18.1When a charging problem arises, make certain that the battery is capable of accepting a normal charge. Use a good battery to double check all connections, the AC outlet for a full 120-volts, the charger clips for correct polarity and the quality of the connections from the cables to the clips and from the clips to the battery system. The clips must be clean.

18.2When a battery is very cold, partially charged or sulfated, it will not draw the full rated amperes from the charger. It is both dangerous and damaging to a battery to force higher amperage into it than it can effectively use in recharging.

18.3When an UNKNOWN OPERATING PROBLEM arises, please read the complete manual and call the customer service number for information that will usually eliminate the need for return.

If the above solutions do not eliminate the problem or for information about troubleshooting

or replacement parts, call toll-free from anywhere in the U.S.A.

1-800-621-5485

7:00 am to 5:00 pm Central Time Monday thru Friday

• 10 •