Auralex Acoustics SonoFlat SFS-184General Information, Q’Fusor Installation Guide, ➊ ➋ ➌ ➍

SonoFlat SFS-184 General Information

Recommended Additional Installation Materials

• Caulk-gun(for Tubetak Pro)	• Tape measure
• Carpenters Level	• Small ladder (depending on ceiling height)

Optional Additional Installation Materials

• Foamtak Spray Adhesive* • T-Pins

*This system includes Tubetak Pro Adhesive, which is safe to use on all included products. You may wish to use Auralex’s Foamtak Spray Adhesive for quicker drying times. Foamtak is available through all Auralex authorized dealers. Do NOT use Foamtak to install Q’Fusors.

Q’Fusor Installation Guide

Apply Tubetak Pro to the back of the	Carefully press Q’Fusor into the face of a
➊ Q’Fusor, as pictured.	➋ SonoFlat Panel or directly to the surface of a
	wall or ceiling.

TIP

If you plan on painting the Q’Fusor, make sure to do so before applying it to the wall or ceiling.

CAUTION

Use only lwater-based paints on the Q’Fusor. Oil-based paints will cause severe deterioration of the product.

SonoColumn Placement Options

➊ ➋ ➌ ➍

Flush in corner At 45° to corner Side-by-side in corner On wall w/ Collars