11.MAINTENANCE INSTRUCTIONS
11.1After use and before performing maintenance, unplug the device and disconnect the inverter from the 12 volt power supply.
11.2Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery terminals, cords, and the inverter case.
11.3Ensure that all of the inverter components are in place and in good working condition.
11.4Servicing does not require opening the unit, as there are no
11.5All other servicing should be performed by qualified service personnel.
12.Troubleshooting
PROBLEM | REASON | SOLUTION |
Red LED is on, audible alarm | Poor contact at terminals. | Check connections at power |
is on, and/or inverter does not |
| supply. |
function. | Fuse blown. | See “IF THE INVERTER |
| ||
|
| FUSE BLOWS” section. |
| Inverter shutdown. | See “LED INDICATOR AND |
|
| SHUTDOWN PROTECTION” |
|
| section. |
| Inverter may not be working | See Warranty and call |
| properly. | Customer Service |
|
| 5485 (Hours: 7 am – 5 pm |
|
| CST). |
13.BEFORE RETURNING FOR REPAIRS
13.1When an inverter problem arises, make certain that the power supply is operating properly (fully charged). Double check all connections for correct polarity and the quality of the connections from the cables to the connectors and from the connectors to the inverter. The connectors must be clean.
13.2When an UNKNOWN OPERATING PROBLEM arises, please read the complete manual and call the customer service number for information that will usually eliminate the need for return.
If the above solutions do not eliminate the problem or for information about troubleshooting,
call
7:00 am to 5:00 pm Central Time Monday through Friday
14.SPECIFICATIONS
| Model: | |
Maximum Continuous Power |
| 1000 Watts |
Surge Capability (Peak Power) |
| 2000 Watts |
No Load Current Draw |
| <0.6A |
Wave Form |
| Modified Sine Wave |
Input Voltage Range |
| 10.5V – 15.5V DC |
Output Voltage Range |
| 110V – 125V AC |
Low Battery Alarm |
| Audible, 10.3V – 10.6V DC |
Low Battery Shutdown |
| 9.7V – 10.3V DC |
High Battery Shutdown |
| 15.0V – 16.0V DC |
Optimum Efficiency |
| >85% |
|
| • 7 • |
