Schumacher PID-200 Device demands more than 200 Watts continuous power, Inverter is too hot

5.Device demands more than 200 Watts continuous power.

Cycle inverter power OFF and ON.

If problem persists, use a larger inverter or a smaller device.

6.Inverter is too hot.

Increase ventilation to inverter. Move inverter to a cooler area.

Reduce the power consumption of the device.

PROBLEM: Inverter Does Not Turn On

Reason/Solution

1.Poor contact at terminals. Unplug and reinsert PID-200.

2.Fuse is blown.

A blown fuse is usually caused by reverse polarity or a short circuit within the inverter. To replace, contact a qualified service technician who will diagnose the inverter and replace the fuse with the appropriate replacement.

3.Inverter may be defective.

See warranty and call Customer Service 800-621-5485 (Hours: 7 a.m. – 4:30 p.m. CST).