SCI Scandicrafts A2840/R manual Sleep Button, Time/Set Button, To set the current time, Remote

GENERAL OPERATION

The unit can be operated using either the wireless remote or the front control panel.

OFF

1.On the rear of the purifier, switch the master power to the “on” position (the front display will light up).

ON

2.Press the ON/OFF button on the front of purifier to power on the unit. The fan will start.

3.Press the Fan▲ and Fan▼ buttons to adjust the airflow speed to your desired level.

4.Press the Purify▲ and Purify▼ buttons to set the purifier setting from Stage 1 through Stage 5 to accommodate your desired level.

5.Press the Sterilize button to operate the UVC and Photo Catalyst sanitize feature. Press the Sterilize button again to stop its operation. The UVC bulb will produce a light blue glow on the inside of the unit when this feature is on. Note: Do not look directly at the UVC Bulb while it is operating.

6.Press the Anion button to turn on the negative ion generator. Press the Anion button again to stop the negative ion generator function.

Sleep Button

Press the Sleep button to use the screen saving mode. This will turn most of the display lights off. Press any button on the front panel to deactivate the sleep mode. The working mode of Anion, Purify, Sterilize, and Fan Speed will not change while in sleep mode. If the timer function is set to turn the power off at a set time, do not use the sleep function. The timer will only deactivate the sleep mode instead of shutting down the unit if the sleep mode is on.

Time/Set Button

Read these instructions thoroughly before setting the time.

*** After 8-10 seconds of inactivity, the clock will be set or you will have to start the process again. ***

The clock is a 24-hour clock; 13:00 would be 1:00 p.m.

To set the current time:

1.Press the Time/Set button twice. “Time” will blink on the display.

2.The Purify▲ and Purify▼ buttons adjust the hours. The Fan▲ and Fan▼ buttons adjust the minutes.

To set the power off timer:

1.While the unit is operating, press the Time/Set button once. “Time/Set” will blink on the display.

2.The Purify▲ and Purify▼ buttons adjust the hours. The Fan▲ and Fan▼ buttons adjust the minutes.

Remote

Sterilizer Feature Purifier Feature (5 Stages) Anion Feature

Power Switch Time Fan Speed Operating Display Operating Buttons

4