Back Panel Description

Back Panel Description

The following illustration describes the back panel components of the DPC2505 and EPC2505 wideband cable modems.

1POWER 12VDC—Connects the cable modem to the DC output of the AC power adapter that is provided with your cable modem. Only use the AC power adapter and power cord that is provided with your cable modem

CAUTION:

Avoid damage to your equipment. Only use the AC power adapter and power cord that is provided with your cable modem.

2ETHERNET—RJ-45 Gigabit Ethernet port connects to the Ethernet port on your PC

3RESET—Reset-to-Default button (Factory Reset)

Note: This button is for maintenance purposes only. Do not use unless told to do so by your service provider.

4USB—USB 2.0 port connects to the USB port on your PC

5CABLE—F-Connector connects to an active cable signal from your service provider

12

4015259 Rev B