Front Panel LED Status Indicator Functions
Normal Operations
The following chart illustrates the appearance of the cable modem front panel LED status indicators during normal operations.
Front Panel LED Status Indicators During Normal Operations
Step | 9 | |
|
|
|
Front Panel | Normal Operations | |
Indicator |
| |
1 | POWER | On |
2 | DS 1 | On |
| DS | On - When wideband operation is enabled on that channel |
|
| Off - When wideband operation is not available on that channel |
3 | US | On |
4 | ONLINE | On |
5 | LINK | ON - When a single device is connected to either the Ethernet or USB port and no data is |
|
| being sent to or from the modem |
|
| BLINKS - When only one Ethernet or USB device is connected and data is being |
|
| transferred between the consumer premise equipment (CPE) and the cable modem |
|
| OFF - When no devices are connected to either the Ethernet or USB ports |
|
| Notes: |
|
| When both Ethernet and USB devices are connected to the modem at the same time, |
|
| and data is being transferred through only one of the devices (Ethernet or USB), the |
|
| LINK LED status indicator illuminates continuously. |
|
| Whenever data is being sent through both data ports (Ethernet and USB) |
|
| simultaneously, the indicator blinks as described above. |
30 | 4015259 Rev B |