Calibration
Your AccuGreen® 3000TM spreader was calibrated at the factory. You may check the calibration as follows:
1.
2.
3. The front edge of the shutoff bar should be
flush with the calibration line engraved on the bot- tom of the hopper.
4. To adjust alignment, use a small wrench to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.
Spend a few minutes on maintenance after each use
1. Never leave product in the spreader. Pour leftover material back into the package and seal the package tightly.
2. After each use, wash thoroughly to remove all material clinging to the spreader. Hot water may be required at times to remove stubborn residue. Allow the
spreader to dry thoroughly in the sun. 3. Store your spreader in a clean dry place.
NOTE: This unit does not require lubrication.
SHUTOFF
BAR
CALIBRATION LINE
DROP SPREADER
Ready to use!
No assembly!
The Scotts Difference®
• | Number 1 selling drop spreader nationwide |
• | Cushioned, |
Thank you
for purchasing a Scotts® AccuGreen® 3000TM spreader. The Scotts Company introduced the first home lawn spreader in 1946 and has continued to offer superior quality that translates into more accurate application, a better- looking lawn, and a
to give you great results — now and for many years to come.
| locking on/off control |
• | |
| for increased accuracy |
• | Hopper holds |
| meter) of Scotts fertilizer |
• | Heavy duty frame |
• | 22 inch (56 cm) spread pattern for maximum |
coverage
Call Scotts’ toll- free | “Lawn Success Made Easy” ™ |
Consumer Helpline: | Visit Scotts’ website at |
www.scottslawn.com |
Scotts
Guarantee®
If for any reason you, the consumer, are not satisfied after using this product, you are entitled to get your money back. Simply send us evidence of purchase and we will mail you a refund check promptly.
The Scotts Company
® 14111 Scottslawn Rd.
Marysville, Ohio 43041
ACCUGREEN 3000 | 73730 |
STRIP IN UPC CODE
0 32247 73730 2
PROOF OF PURCHASE
125001212
• Rustproof hopper, agitator and polymer components
•
•Scotts
•Made in the U.S.A.
INSTRUCTIONS INSIDE
Printed on Recyled Paper | ©2001, The Scotts Company. World rights reserved. |