Scotts SMV122 Operating Instructions, Connection to Active Subwoofer, Setting the Clock

OPERATING INSTRUCTIONS

CONNECTION TO ACTIVE SUBWOOFER

To enhance high bass, connect the RCA SUB WOOFER jack located at back of unit to your active subwoofer.

CONNECTION TO EXTERNAL AMPLIFIER

You have a possibility to connect to external Amplifier through RCA LINE OUT jacks located at back of unit.

SETTING THE CLOCK

Clock can be set while clock time is displayed, at STANDBY mode or CD, TUNER modes. During CD, or TUNER operations, press REMAIN/MODE button until clock is displayed, and follow the procedures below:

1.) Press the MEMORY / C-ADJ button for more than one second. The unit will then display the time and HOUR will start flashing.

MEMORY

A M

2.) Adjust the hour by pressing the / buttons. Set the correct hour for AM or PM.

3.) Press MEMORY / C-ADJ button to confirm. Minutes will start flashing.

4.) Adjust the minutes by pressing the / buttons.

A M

5.) Press MEMORY / C-ADJ button to store the time.

NOTE:

•If button is not pressed within 10 seconds, the clock display stops flashing.

•If the unit is disconnected from the AC power for more than one minute, you will need to reset the clock.

10

SMV122_ib_060402.p65 10

4/6/2002, 17:42