Table of Contents |
|
Quick Start | 1 |
Controls and Indicators | 2 |
iP42 Display | 2 |
Installing/Replacing iP42 Backup Batteries / Battery Warning | 3 |
Setting Up the iP42 | 4 |
Using the iP42 Alarms | |
Listening to iPhone/iPod, Radio or Aux devices | |
Sleep mode, Dimmer and more | 7 |
A Consumer Guide to Product Safety | 8 |
Troubleshooting | |
Warranty Information | 11 |
A Consumer Guide to Product Safety |
|
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area.
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference you can try one or more of the following corrective measures:
•Reorient or relocate the receiving antenna.
•Increase the distance between the equipment and the radio or TV.
•Use outlets on different electrical circuits for the equipment and the radio or TV.
•Consult your dealer or an experienced radio/television technician if the problem still exists.
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s warranty and void your FCC authorization to operate it.
This Class B digital apparatus complies with Canadian
Cet appareil numérique de la classe B est conforme à la norme
Maintenance
•Place the unit on a level surface away from sources of direct sunlight or excessive heat.
•Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
•Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.
