iP42 Quick start
1: power | 2: inserts | 3: time sync |
RESET |
RESET |
TEST |
TEST |
Attach AC adaptor cable to | Select the dock insert for your iPhone |
DC jack on back of the iP42 and | or iPod® model from the table below |
plug the other end into a | and place insert in dock. |
working outlet. |
|
•Dock your iPhone
•Press the Time set/sync button on back of the unit.
•“SYNC OK” will flash on the display, indicating sync attempt
•Day and date will appear and you will hear a beep when sync is complete.
•If sync fails, attempt again or set time manually (see page 3).
Use this insert | iPhone 3G | iPod touch 2G | nano 5G | |
insert 15 | insert 16 | insert 18 | ||
| ||||
For this iPhone / iPod | iPhone 3G/3GS | iPod touch 2G | nano 5G |
4: iPhone/ | 5: radio |
iPod |
|
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free at
800-288-2792 to purchase one.
Gently dock an iPhone or iPod into the dock with proper insert (iPhone/iPod must not be in a skin or case). The iPhone/iPod will charge while docked. Press the 
Button to play your iPhone/iPod.
•Press the Radio button to select FM radio mode.
•Turn the Set Wheel to select a station.
•See page 4 for programming presets.
1
