How to Use this Guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat ClearView. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your Deep Cleaner.
Pay particular attention to the product diagram, assem- bly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat ClearView for many years.
Your ProHeat ClearView comes in three, easy to assemble components.
Upper Handle
Lower Handle Tool Caddy
The only thing you will need to assemble your cleaner is
a Phillips head 
screwdriver.
How To Put It Together
Refer to Assembly Diagram on page 4
WARNING:
Do Not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
1.
Slide Upper Handle onto Lower Handle.
Feed bundled power cord through Tool Caddy
2. from caddy’s flat side.
3.
Align Upper Handle holes and Tool Caddy holes.
Place hex nut into back of Tool Caddy and hold in
4. place. Insert bolt from front to back turning into the hex nut until snug. Do not over tighten. Repeat for the second bolt and hex nut.
5.
Insert 2 screws into lower 2 holes.Turn until snug.
Snap tools into Storage on the Tool Caddy as
6
6. shown in figure 6.
Wrap Power Cord and Flex Hose as shown in
7. figure 7.
ProHeat ClearView assembly is now complete.
7
5
