![](/images/new-backgrounds/1059011/5901121x1.webp)
| When You’re Done | |
| Disconnect the TurboBrush from the flex hose by pushing | |
1. | ||
down on the button lock and pulling straight off. | ||
| Once removed from the Flex Hose, the TurboBrush can | |
2. | ||
be cleaned. |
AMove the switch to the “SUCTION” position.
BRinse under running water.
CCheck spray nozzle for dirt. If necessary, clean with a soft bristle brush.
DReplace TurboBrush in the special storage location on the handle front. (on select models only)
Operations
|
| Before You Clean Carpets |
|
| Plan activities to give carpet time to dry. |
1. | ||
|
| Remove easily moved furniture from the room (chairs, |
2. |
| |
| lamps, coffee tables, etc). | |
|
| Vacuum thoroughly to pick up loose debris and pet hair |
3. |
| |
| before using the ProHeat ClearView. | |
|
| Plan your cleaning route to leave an exit path. It is best to |
4. |
| |
| begin cleaning in the corner farthest from your exit. |
Machine Preparation
Set up the machine following instructions in
1. The Features section, pages
Use a BISSELL Advanced Cleaning Formula in the SmartMix
2. tank.When cleaning carpets, stairs or upholstery, use clean water in the SmartMix Tank for gentle cleaning or rinsing.
3. Choose the SmartMix setting to match the cleaning job.
Set the ReadyTools switch to either Tools/PreTreat or Floor
4. Cleaning.
|
| 9 |
EXIT |
| 10 |
| 11 | 8 |
|
| |
12 |
| 7 |
|
|
| 6 |
5 | 2 |
| 3 |
| 4 |
3’
1 STARTHERE 4’
11