Bissell 1699 Troubleshooting, Machine Power Switch is not, Tanks may not be seated properly

Troubleshooting

SmartTemp Ready Light does not illuminate.

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

Possible Causes		Remedies
	The SmartTemp switch is not	Turn on the SmartTemp switch.
	turned ON.
	The machine Power Switch is not	Both switches must be ON to
	turned ON.	activate the SmartTemp Ready Light.
Reduced spray or no spray
	Possible Causes	Remedies

Bladder may be empty.

SmartMix bottle may be empty.

The filter may be clogged.

Tanks may not be seated properly.

Pump may have lost prime.

The Pump Belt may be broken.

Lift Here

Insert

Screwdriver

Blade Here

DirtLifter PowerBrush does not turn.

Refill tank with hot tap water.

Fill with BISSELL Deep Cleaning Formula for cleaning or water if rinsing.

Clean out Flow Indicator Filter, page 18.

Turn power OFF; remove & reseat tanks.

Turn power OFF; after 1 minute turn ON and depress trigger.

Turn the machine OFF and unplug from the outlet. To check if a Pump Belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. You should be able to see the Pump Belt looped around the motor shaft. If it is broken or missing, please refer to Replacement Parts on page 23 before calling Consumer Services. Complete installation instructions will accompany the replacement belt.

Possible Causes Remedies

The Brush Belt or Pump Belt may be broken.

Turn the machine OFF and unplug from the outlet. To check if a Pump Belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. If broken refer to pages 19-20.

21