![](/images/new-backgrounds/1059011/5901113x1.webp)
SmartMix Continued
4.
Replace SmartMix concentrate bottle.
5.
Note: If bottle leaks, check for proper positioning of
Choose the SmartMix setting that fits the cleaning job.
Water Rinse - use for gentle cleaning or for the final rinse after cleaning.
Normal- automatically provides the best mix of water and concentrate for most cleaning jobs.
High Traffic- automatically mixes the right amount of water and concentrate to dissolve tough grime and heavy soil. Note: Residual cleaning materials left in carpet from other products may cause excessive foaming when picked up. If foam is overflowing tank, move SmartMix dial to “Water Only” position until the condition stops.
Note: Both the SmartMix Bottle and the clean water tank must have liquid in them in order for the machine to spray. If one tank is empty, the machine will temporarily lose its prime and not apply either cleaning solution or water only.
Important: If you are using the WATER RINSE setting, fill the Smart Mix bottle with water also!
When filling bottle or storing unit, set
dial to:
SmartMix
Dial
TRAFFIC | RINSE | |
HIGH | NORMALATER | |
| W |
|
Tip:
Deep Cleaning stairs and high traffic areas on a regular basis can prolong carpet life.
WARNING:
To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level.
DirtLifter® PowerBrush | The pow- |
| ered |
brush roll at the floor nozzle is designed to enhance cleaning performance. The bristle pattern lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension
WARNING:
To reduce the risk of fire, use only BISSELL Deep Cleaning Formula in your ProHeat ClearView. Use of cleaning formulas which contain lemon or pine oil may damage this appli- ance and void warranty. Chemical spot cleaners or solvent based soil removers should not be used. These products may react with the plastic materials used in your ProHeat ClearView, causing cracking or pitting.
7