Bissell 1699 warranty Remove the Tank-in-Tank follow steps 1, Will dispose of the dirty water

When It’s Time to Empty Tank-in-Tank

Remove the Tank-in-Tank – follow steps 1 and 2

1. on page 8.

Carry the Tank-in-Tank, like a bucket, to the sink where you

2. will dispose of the dirty water.

Remove Tank Lid by rotating handle forward to unlatch lid and

3. lifting lid off tank.

Pour out dirty water.

4.

After each use, remove and rinse the lint screen located on

5. the Tank Lid.

A.Remove Tank Assembly from unit.

B.Remove Tank Lid.

C.Remove any debris caught in Lint Screen.

D.Reinsert Lint Screen on Tank Lid. The screen will click into place

E.Replace Tank Lid.

F.Reinsert Tank Assembly into unit.

6.Refill with clean tap water as above, steps 5 through 9 on page 8, and refill the SmartMix bottle with BISSELL Deep Cleaning Formula as necessary.

When the cleaning job is complete, rinse out the

7.Tank-in-Tank by rinsing clean water between the Bladder and tank.

8.Return Tank-in-Tank to the machine, following steps 6 through 9 (on page 8).

Refer to the Maintenance section, page 18 for the

9.final cleanup.

Pour out

3 Rotate Handle to 4 dirty water Unlatch

5C Lint Screen 5D

3

Fill bladder

6 only with clean 8 hot tap water

Latched

Tip:

A special red
float device
in the tank will
cause the cleaner
to stop removing	Tip:
solution from the

carpet and the	Thorough
motor sound will
	vacuuming
rise in pitch to let
	before deep
you know the
	cleaning will
dirty water tank is
	prevent early
full.
	clogging of
	lint trap.

9