Bissell 1699 Routine Maintenance, Void the warranty

Routine Maintenance

1.			Turn Power and SmartTemp switches OFF.
2.			Unplug power cord from the outlet and coil around Power
			Cord Quick Release.
3.			Remove and rinse tools in clean, running water, dry and
			replace in the Tool Caddy.
4.			Coil Flex Hose around storage brackets on Tool Caddy.
5.			Remove Tank-In-Tank, dispose of dirty water. See Features
			section, page 8-9.
6.			Rinse out Tank-In-Tank and replace on the machine; Clean
			out lint trap.
			Clean out the Flow Indicator Filter each time it is used to
		7.
			ensure best cleaning performance. Unscrew the Flow
			Indicator Cap, lift out the Red Rotor and White Filter. Rinse all
			three parts in tap water. Replace the filter and rotor. Replace
			the Flow Indicator Cap; turn until snug, do not over-tighten.
			Wipe all exterior surfaces with a soft cloth.
		8.
			Store cleaner upright in a protected, dry area.
	9.
			Note: ProHeat ClearView uses water and must not be
			stored where there is a danger of freezing.
			Freezing will damage internal components and
			void the warranty.
10.			When carpet is dry, vacuum again to remove hair and fuzz
			the ProHeat ClearView may have loosened.

18

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

Tip:

SmartMix Bottle may be stored with concentrate ready for your next cleaning job. Make sure dial is turned to the Water Rinse Setting when storing.

When filling bottle or storing unit, set

dial to:

Cap

Rotor

Filter