![](/images/new-backgrounds/1059011/5901133x1.webp)
Cleaning Bare Floors Continued
Machine Preparation
Set up machine following instructions in the Features
1. section, pages
Use BISSELL Floor Cleansing Formula in the SmartMix tank.
2.
3.
Plug into a proper outlet and turn Power Switch ON. Turn
4. SmartTemp switch ON. The SmartTemp Ready Light illuminates and ProHeat ClearView is ready to clean.
When filling bottle or storing unit, set
dial to:
Bare Floor Cleaning Technique
Slowly move the machine nozzle with Bare Floor Tool
1. forward and back over soiled surface one time while pressing the trigger. Caution: Do not overwet.
Repeat the motion without pressing the trigger using the
2. Bare Floor Tool to squeegee and suction up the dirty water.
3.
4.
Repeat steps 1 and 2 backing along the exit path.
Allow about 30 minutes for the floor to dry completely.
When the cleaning job is complete refer to the
5. Maintenance/Storage section on page 18.
To remove Bare Floor Tool gently bend long tab (right side)
6. outward and pull tool down away from nozzle. Rinse thoroughly, dry and store.
17