Seagate manual 11.2 D

CHEETAH 15K.7 FC PRODUCT MANUAL, REV. E 45
11.1.10 Fibre Channel Arbitrated Loop options
Table 15 lists the FC-AL options supported by Cheetah 15K.7 FC drives.
11.2 DUAL PORT SUPPORT
Cheetah 15K.7 FC drives have two independent FC-AL ports. These ports may be connected on independent loops or on
the same loop. Port A and Port B may be connected in any order or combination.
• If both ports are connected on independent loops and hard addressing is used, the drive interface address is selected
through the interface connector, both ports will seek the same loop address. If no conflict, both ports will have the same
loop address.
• If both ports are connected in the same loop and hard addressing is used, at least one port will attempt taking a soft
address to prevent an address conflict.
Note. When a Cheetah 15K.7 FC drive is connected in loops with previous Seagate FC drive products:
Barracuda 4LP FC (ST32171FC, ST34371FC, and ST34571FC)
Barracuda 9FC (ST19171FC)
Cheetah 4LP FC (ST34501FC)
Cheetah 9FC (ST19101FC)
the connection of Port A and B for these products must follow the requirements in their product manuals.
Subject to buffer availability, the Cheetah 15K.7 FC drives support:
• Concurrent port transfers—The drive supports receiving transfers on both ports at the same time when the ports are on
independent loops.
• Full duplex—The drive supports sending FCP_Data, FCP_RSP, FCP_XFR_RDY and ELS transfers while receiving frames
on both ports.
Table 15 FC-AL options supported
OPTION SUPPORTED
OPEN Half Duplex Accepted from another device.
OPEN Full Duplex Sent to open another device. Accepted from another device.
Private Loop Yes
Public Loop Yes
Old Port State No
Loop Position Yes
Loop Position Report Yes