CHEETAH 15K.7 FC PRODUCT MANUAL, REV. E 55

11.4 MISCELLANEOUS OPERATING FEATURES AND CONDITIONS

Table 21 lists various features and conditions. A ā€œYā€ in the support column indicates the feature or condition is supported. An

ā€œNā€ in the support column indicates the feature or condition is not supported.

Table 21 Miscellaneous features
SUPPORTED FEATURE OR CONDITION
Y FC-AL selective reset (LIP Reset)
N Automatic contingent allegiance
N Asynchronous event notification
N Synchronized (locked) spindle operation
Y Segmented caching
N Zero latency read
Y Queue tagging (up to 128 queue tags supported)
Y Deferred error handling
Y Parameter rounding (controlled by Round bit in Mode Select page 0)
Y Reporting actual retry count in Extended Sense bytes 15, 16, and 17
N Adaptive caching
Y SMP = 1 in Mode Select command needed to save RPL and rotational offset bytes
Table 22 Miscellaneous status
SUPPORTED STATUS
Y Good
Y Check condition
Y Condition met/good
Y Busy
Y Intermediate/good
Y Intermediate/condition met/good
Y Reservation conflict
Y Task set full
N ACA active
N ACA active, faulted initiator