Seagate 2160N manual What you need, Before you begin

Medalist Pro 2160N, Rev. B 1

What you need

•Straight-edge and Phillips screwdrivers

•Drive mounting screws

•A SCSI interface host adapter

•A 50-pin SCSI interface cable

•An unused drive power cable for your new drive

•A DOS or Windows 95 system setup diskette (Seagate recom- mends using DOS Version 5.0 or later).

•If you are mounting this 3.5-inch drive in a 5.25-inch drive bay, you need a mounting adapter or frame kit. Also, you may need drive mounting rails if your drive bay is not designed for direct mounting.

Before you begin

•Make sure your computer is turned off before you open the case.

•Read the handling precautions following and inspect the drive to make sure that it is not damaged.

•Save your foam-lined Seagate® disc drive box. This box has been approved by Seagate for shipping a Seagate disc drive. Using any other container or packing material voids your drive warranty.