SEAGATE 600 SSD PRODUCT MANUAL, REV. B 25 67 Minimum PIO transfer cycle time without flow control (120ns) 0078H
68 Minimum PIO transfer cycle time with IORDY flow control (120ns) 0078H
69 Additional Features and Commands supported.
Trim Features supported, DMA commands supported
0100H
70 Reserved 0000H
71–74 Reserved for ATAPI 0000H
75 Queue depth 001FH
76 Serial ATA Capabilities Supported 870EH
77 Reserved for Serial ATA 0006H
78 Serial ATA features supported 0056H
79 Serial ATA features enabled 0040H
80 Major version number 01F0H
81 Minor version number 0029H
82 Commands and feature sets supported 746BH
83 Commands and feature sets supported 7401H
84 Commands and feature sets supported 4163H
85 Commands and feature sets supported or enabled 7469H
86 Commands and feature sets supported or enabled B401H
87 Commands and feature sets supported or enabled 4163H
88 Ultra DMA support and current mode (see note following this table) 407FH
89 Security erase time 0004H
90 Enhanced security erase time 0000H
91 Current APM level value 0000H
92 Master password Identifier FFFEH
93 Hardware reset result 0000H
94 Reserved 0000H
95–99 ATA-reserved 0000H
100–103 Total Number of User Addressable Logical Blocks for 48-bit commands. These words
are required for drives that support the 48-bit addressing feature. Maximum value:
0000FFFFFFFFFFFFh
480GB model = 937,703,088
240GB model = 468,862,128
120GB model = 234,441,648
104 Reserved for Streaming Command Set 0000H
105 Maximum number of 512-byte blocks of LBA Range Entries
(see 4.18.3.2) per DATA SET MANAGEMENT command
0001H
106 Physical sector size / logical sector size 6003H
107 Inter-seek delay for ISO 7779 standard acoustic testing 0000H
108–111 World wide name XXXXH
112–115 Reserved 0000H
116 Reserved for TLC 0000H
117–118 Logical sector size (DWord) 0000H
119 Commands and feature sets supported 4014H
120 Commands and feature sets supported or enabled 4014H
121–126 Reserved for expanded supported and enabled settings 0000H
WORD DESCRIPTION VALUE