Hawk 4 (Wide) Family Install Guide, Rev. A 33
___________________________________________
Drive installation
This section describes the physical mounting of the
drive in the host cabinet and the logical installation as
a system member, which is called drive setup.
Disc drive mounting
Do not touch the connector pins or any PCB compo-
nents without observing static-discharge precautions.
Always handle the drive by the frame only.
The drive may be mounted in any orientation.
•See notes on Figures 4 and 5 pertaining to proper
drive installation.
•Verify that all connections between the drive and the
host system are correctly installed. Most cables have
a contrasting color stripe indicating pin 1. Pin 1 on the
drive I/O, J1-auxiliary DC power connectors are
indicated in the figures in the Initial Set-up Informa-
tion section.
•Verify option select and drive ID select jumpers. See
Drive Configuration section.