Seagate ST250LT014 - 9YK14C manual Shock, Operating shock, Nonoperating shock, Vibration

Models: ST250LT014 - 9YK14C ST160LT011 - 9ZVG4D ST320LT007 - 9ZV142 ST160LT014 - 9YK14D ST160LT007 - 9ZV14D ST320LT011 - 9ZVG42 ST160LT009 - 9WC14D ST250LT011 - 9ZVG4C ST320LT014 - 9YK142 ST250LT007 - 9ZV14C ST320LT009 - 9WC142 ST250LT009 - 9WC14C

1 46
Download 46 pages 18.79 Kb
Page 19
Image 19
3.10.5Shock

3.10.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

3.10.5.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 350 Gs based on half-sine shock pulses of 2ms. Shocks should not be repeated more than two times per second.

3.10.5.2Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse of 2ms duration.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 1000 Gs based on a nonrepetitive half-sine shock pulse of 1ms duration.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 600 Gs based on a nonrepetitive half-sine shock pulse of 0.5ms duration.

3.10.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

3.10.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

5–500 Hz

1.0 Gs (0 to peak). Max displacement may apply below 10Hz.

3.10.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

5–500 Hz:

5.0 Gs (0 to peak). Max displacement may apply below 22Hz.

Momentus Thin Product Manual, Rev. C Gen-2

13

Page 19
Image 19
Seagate ST250LT014 - 9YK14C manual Shock, Operating shock, Nonoperating shock, Vibration, Operating vibration