3.4DRIVE MOUNTING
You can mount the drive in any orientation using four screws in the
•Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
•Use only
•The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes.
•Do not overtighten the mounting screws (maximum torque: 6
Weight: (maximum)
2TB models | 1TB models | 500GB models |
710g (1.565 lb) | 640g (1.411 lb) | 610g (1.345 lb) |
|
|
|
Note. These dimensions conform to the Small Form Factor Standard documented in
in 
mm
Breather |
Hole |
in |
mm |
in 
mm
Figure 6. Mounting dimensions—top, side and end view
CONSTELLATION ES SERIAL ATA PRODUCT MANUAL, REV. F | 25 |
