Barracuda ATA Family Installation Guide, Rev. A | 13 |
4.Select either (E)asy Disk Installation or (A)dvanced Disk Installation.
Disk Manager lists all the hard drives that it detects. You should see your new Seagate drive and your existing hard drive, if any.
If any hard drive is not recognized, exit Disk Manager and turn off your computer. Check all cables, jumpers and BIOS settings. Then start at step 1 to run Disk Manager again.
5.If Disk Manager recognizes all your drives, select the drive you want to install and press ENTER. Disk Manager partitions and formats the drive.
Important. If your BIOS does not support drive capacities greater than 8.4 Gbytes, Disk Manager installs a Dynamic Drive Overlay (DDO) on your hard drive. If this driver has been installed, you should see a blue Disk Manager banner each time you boot your com- puter. See the Disk Manager online manual for details.
6.Follow the instructions in the
