9.5FC-AL physical interface

Figure 9 shows the location of the J1 Fibre Channel single connection attachment (FC-SCA). Figure 11 pro- vides the dimensions of the FC-SCA connector.

Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of Seagate’s Fibre Channel drives are provided in the Fibre Channel Interface Manual..

J1 interface connector

Figure 9. Physical interface

9.5.1Physical characteristics

This section defines physical interface connector.

9.5.1.1Physical description

FIbre Channel drives may be connected in a loop together or with other compatible FC-AL devices. A maxi- mum of 127 devices may have addresses; however, one of the addresses is reserved for a fabric port switch device. This means 126 addresses are available for FC-AL devices. More FC-AL compatible devices may physically reside on the loop, but they will not be functional because they would not be able to obtain valid addresses.

Port bypass circuits (PBCs) allow devices to be inserted into unpopulated locations or removed from the loop with loop operation recovery after a brief interruption. These PBCs are located external to the FC-AL device. Figure 10 shows the relationship between the PBC and FC-AL device.

From Previous

Drive

Port Bypass

Circuit N–1

Drive N–1

Port Bypass

Circuit

 

To Next

 

MUX

Drive

Port Bypass

 

 

 

Circuit N+1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select

 

 

 

Serial

Serial

 

 

Drive N+1

In

Out

 

 

 

 

Drive N

 

 

 

Figure 10. Port bypass circuit physical interconnect

Cheetah NS FC Product Manual, Rev. B

61

Page 71
Image 71
Seagate ST3400755FC, ST3300955FC manual FC-AL physical interface, Physical characteristics, Physical description