Seagate ST3320410CS, ST3320310CS manual Drive mounting, Mounting dimensions for 500 GB models

3.4Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precau- tions when mounting the drive:

•Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.

•Use only 6-32 UNC mounting screws.

•The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes.

•Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

Recommended case temperature measurement location

Figure 4. Mounting dimensions (for 500 GB models)

Pipeline HD Series SATA Product Manual, Rev. C 21